Chapter 1 Introduction
WRE6606 User’s Guide
11
The following table describes the LEDs.
Table 1 Front Panel LEDs
LED COLOR STATUS DESCRIPTION
Power/WPS Green On The WRE6606 is receiving power and functioning properly.
This remains on for 5 minutes after a successful WPS connection
has been established.
Blinking The WRE6606 is booting, resetting to factory defaults, the
WRE6606 is waiting for another WPS device to connect, or
firmware upgrade is in progress.
Off The WRE6606 is not receiving power, or there is no WPS
connection established.
2.4G Green On In AP mode, it means WLAN signal is detected.
Blinking In AP mode, Client mode, and Repeater mode, it signifies data is
transmitting.
Different LED colors indicate the Wi-Fi signal strength.
• Green: signifies a signal strength of 50% ~ 100%
• Orange: signifies a signal strength of 21% ~ 49%
• Red: signifies a signal strength under 20%
Off In AP mode, Client mode, and Repeater mode, the 2.4 GHz
wireless LAN is not enabled. There is no signal detected or the
WRE6606 is not connected to a wireless router/AP, or the LEDs
are turned off using the WPS button.
5G Green On In AP mode, it means WLAN signal is detected.
Blinking In AP mode, Client mode, and Repeater mode, it signifies data is
transmitting.
Different LED colors indicate the Wi-Fi signal strength.
• Green: signifies a signal strength of 50% ~ 100%
• Orange: signifies a signal strength of 21% ~ 49%
• Red: signifies a signal strength under 20%
Off In AP mode, Client mode, and Repeater mode, the 5 GHz
wireless LAN is not enabled. There is no signal detected or the
WRE6606 is not connected to a wireless router/AP, or the LEDs
are turned off using the WPS button.
LAN Green/
Orange
On LAN connection is successful.
Blinking Data is transmitting.
Off LAN connection is off.
Different LED colors indicate the Ethernet transfer speed.
• Green: signifies the Ethernet speed has reached 1000 Mbps.
• Orange: signifies the Ethernet speed has reached 10/100
Mpbs.
WPS Green On WPS connection has accomplished.
Blinking WPS connection is in process.
Off WPS connection is disabled or failed.