ZyXEL Communications WRE6606 - Access Point Mode; Chapter 4 Access Point Mode; Overview; What You Can Do

WRE6606 User’s Guide
21
CHAPTER 4
Access Point Mode
4.1 Overview
In Access Point (AP) mode your WRE6606 bridges a wired network (LAN) and wireless LAN (WLAN)
in the same subnet. See the figure below for an example.
Figure 10 Wireless Internet Access in Access Point Mode
Note: See Chapter 8 on page 45 for an example of setting up a wireless network in
Access Point mode.
4.2 What You Can Do
•Use the Status screen (Section 4.4 on page 22) to view read-only information about your
WRE6606.
•Use the LAN screen (Chapter 11 on page 78) to set the IP address for your WRE6606 acting as
an access point.
•Use the Wireless LAN screens (Chapter 10 on page 56) to configure the wireless settings and
wireless security between the wireless clients and the WRE6606.