ZyXEL Communications WRE6606 - Navigation Menus

Chapter 6 Repeater Mode
WRE6606 User’s Guide
35
6.4.1 Navigation Menus
Use the menu in the navigation panel to configure WRE6606 features in Repeater mode.
The following screen and table show the features you can configure in Repeater mode.
Figure 19 Menus: Repeater Mode
The following table describes the sub-menus.
Rate For the LAN ports, this displays the port speed and duplex setting or is left
blank when the line is disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN is
enabled and is left blank when the WLAN is disabled.
Association List 2.4G
# This is the index number of an associated wireless station.
MAC Address This field displays the MAC address of an associated wireless station.
Association Time This field displays the time a wireless station first associated with the
WRE6606’s WLAN network.
Association List 5G
# This is the index number of an associated wireless station.
MAC Address This field displays the MAC address of an associated wireless station.
Association Time This field displays the time a wireless station first associated with the
WRE6606’s WLAN network.
Table 13 Status Screen: Repeater Mode
LABEL DESCRIPTION
Table 14 Menus: Repeater Mode
LINK TAB FUNCTION
Status Status This screen shows the WRE6606’s general device, system and interface
status information.
MONITOR
Monitor
Packet
Statistics
Packet
Statistics
Use this screen to view port status, packet specific statistics, the "system
up time" and so on.
CONFIGURATION
Network