Chapter 10 Wireless LAN
WRE6606 User’s Guide
69
Figure 45 Network > Wireless LAN 2.4G/5G > AP Select (Repeater Mode)
Figure 46 Network > Wireless LAN 2.4G/5G > AP Select (Client Mode)
10.7 MAC Filter
The MAC Filter screen allows you to specify which devices are allowed to access the WRE6606,
while denying access to all unspecified devices. Every Ethernet device has a unique MAC (Media
Access Control) address. The MAC address is assigned at the factory and consists of six pairs of
hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know the MAC address of
the devices to configure this screen.
To change your WRE6606’s MAC Address List settings, click Network > Wireless LAN 2.4G or
Wireless LAN 5G > MAC Filter. The screen appears as shown.
Figure 47 Network > Wireless LAN 2.4G/5G > MAC Filter
To Next Page
Loading...
