Chapter 10 Wireless LAN
WRE6606 User’s Guide
72
10.10 WPS Screen
Use this screen to enable/disable WPS, view or generate a new PIN and check current WPS status.
To open this screen, click Network > Wireless LAN 2.4G or Wireless LAN 5G > WPS tab.
Note: Wireless clients cannot use WPS to set up a wireless network with the WRE6606 in
universal repeater mode.
Figure 50 Network > Wireless LAN 2.4G/5G > WPS (Repeater Mode)
Figure 51 Network > Wireless LAN 2.4G/5G > WPS (AP Mode)
Apply Click Apply to save your changes to the WRE6606.
Reset Click Reset to reload the previous configuration for this screen.
Table 24 Network > Wireless LAN 2.4G/5G > QoS (continued)
LABEL DESCRIPTION
To Next Page
Loading...
