ZyXEL Communications WRE6606 - Tutorials; Chapter 8 Tutorials; Overview; Connecting to the Internet from an Access Point

WRE6606 User’s Guide
45
CHAPTER 8
Tutorials
8.1 Overview
This chapter provides tutorials for your WRE6606 as follows (in access point or repeater mode) as
follows:
• Connecting to the Internet from an Access Point
• Connecting to a Wireless Network Using WPS
• Connecting the WRE6606 to an AP
This chapter provides tutorials for your WRE6606 (in client mode) as follows:
• Connecting the WRE6606 (in Client Mode) to an AP or Wireless Router
8.2 Connecting to the Internet from an Access Point
This section gives you an example of how to set up an access point (AP) and wireless client (a
notebook (B), in this example) for wireless communication. B can access the Internet through the
access point (A) wirelessly.
Figure 20 Wireless Access Point Connection to the Internet
8.3 Connecting to a Wireless Network Using WPS
This section gives you an example of how to set up wireless network using WPS. The following
example uses the WRE6606 as the AP and NWD-211AN as the wireless client which connects to a
notebook.
Note: The wireless client must be a WPS-aware device (for example, a WPS USB adapter
or PCI card).
The following WPS methods for creating a secure connection are described in the tutorial.