Chapter 13 Maintenance
WRE6606 User’s Guide
90
13.9 System Mode
Use this screen to change the operating mode of the WRE6606. For further information on system
operating mode, see Section 3.1.1 on page 19.
Figure 70 Maintenance > System Mode
The following table describes the labels in this menu.
Table 36 Maintenance > System Mode
LABEL DESCRIPTION
Normal mode The default WPS behavior, both 2.4 GHz and 5 GHz bands are supported in up and down
broadcasting.
Range boost
mode
Select this option to set the WRE6606 to Range boost mode--the 2.4 GHz band is
supported on the Up behavior, while the 5 GHz band is supported on the Down behavior.
Speed boost
mode
Select this option to set the WRE6606 to Speed boost mode--the 5 GHz band is supported
on the Up behavior, while the 2.4 GHz band is supported on the Down behavior.
Apply Click Apply to save your changes back to the WRE6606.
Reset Click Reset to reload the previous configuration for this screen.
To Next Page
Loading...
