Chapter 10 Wireless LAN
WRE6606 User’s Guide
59
10.4 General Wireless LAN Screen
Use this screen to enable the Wireless LAN, enter the SSID and select the wireless security mode.
Note: If you are configuring the WRE6606 from a computer connected to the wireless
LAN and you change the WRE6606’s SSID, channel or security settings, you will
lose your wireless connection when you press Apply to confirm. You must then
change the wireless settings of your computer to match the WRE6606’s new
settings.
Click Network > Wireless LAN 2.4G or Wireless LAN 5G to open the General screen.
Figure 33 Network > Wireless LAN 2.4G/5G > General (Repeater Mode)
To Next Page
Loading...
