Chapter 10 Wireless LAN
WRE6606 User’s Guide
63
10.5.2 WEP Encryption
WEP encryption scrambles the data transmitted between the wireless stations and the access points
to keep network communications private. It encrypts unicast and multicast communications in a
network. Both the wireless stations and the access points must use the same WEP key.
Your WRE6606 allows you to configure up to four 64-bit or 128-bit WEP keys but only one key can
be enabled at any one time.
Select Static WEP from the Security Mode list.
Figure 36 Network > Wireless LAN 2.4G/5G > General: Static WEP
Apply Click Apply to save your changes back to the WRE6606.
Reset Click Reset to reload the previous configuration for this screen.
Table 18 Network > Wireless LAN 2.4G/5G > General: No Security (continued)
LABEL DESCRIPTION
To Next Page
Loading...
