Chapter 10 Wireless LAN
WRE6606 User’s Guide
75
Figure 54 Network > Wireless LAN 2.4G/5G > Scheduling
The following table describes the labels in this screen.
10.13 Guest WLAN Screen
This screen (available in AP mode only) allows you to enable and configure multiple wireless
networks and guest wireless network settings on the WRE6606.
You can configure up to four SSIDs to enable multiple BSSs (Basic Service Sets) on the WRE6606.
This allows you to use one access point to provide several BSSs simultaneously. You can then
Table 27 Network > Wireless LAN 2.4G/5G > Scheduling
LABEL DESCRIPTION
Wireless LAN Scheduling
Wireless LAN
Scheduling
Select to enable or disable wireless LAN scheduling.
Scheduling
WLAN Status Select On or Off to specify whether the Wireless LAN is turned on or off. This field works
in conjunction with the Day and For the following times fields.
Day Select Everyday or the specific days to turn the Wireless LAN on or off. If you select
Everyday you can not select any specific days. This field works in conjunction with the
For the following times field.
For the following
times (24-Hour
Format)
Select a begin time using the first set of hour and minute (min) drop down boxes and
select an end time using the second set of hour and minute (min) drop down boxes. If
you have chosen On earlier for the WLAN Status the Wireless LAN will turn on between
the two times you enter in these fields. If you have chosen Off earlier for the WLAN
Status the Wireless LAN will turn off between the two times you enter in these fields.
Apply Click Apply to save your changes back to the WRE6606.
Reset Click Reset to reload the previous configuration for this screen.
To Next Page
Loading...
