Chapter 6 Repeater Mode
WRE6606 User’s Guide
36
Wireless LAN
2.4G
General Use this screen to configure general wireless LAN and wireless security
settings.
AP Select Use this screen to choose an access point that you want the WRE6606 to
connect to.
MAC Filter Use this screen to configure the WRE6606 to block access to devices or
block the devices from accessing the WRE6606.
Advanced Use this screen to configure advanced wireless settings.
QoS Use this screen to enable Wi-Fi MultiMedia Quality of Service (WMMQoS).
WPS Use this screen to enable WPS.
WPS Device Use this screen to add a wireless station using WPS.
Wireless LAN
5G
General Use this screen to configure general wireless LAN settings.
AP Select Use this screen to choose an access point that you want the WRE6606 to
connect to.
MAC Filter Use this screen to configure the WRE6606 to block access to devices or
block the devices from accessing the WRE6606.
Advanced Use this screen to configure advanced wireless settings.
QoS Use this screen to enable Wi-Fi MultiMedia Quality of Service (WMMQoS).
WPS Use this screen to enable WPS.
WPS Device Use this screen to add a wireless station using WPS.
LAN IP Use this screen to configure LAN IP address and subnet mask.
OneConnect OneConnect Use this screen to enable or disable Wi-Fi auto-configuration.
MAINTENANCE
General General Use this screen to view and change administrative settings such as system
and domain names.
Password Password
Setup
Use this screen to change the password of your WRE6606.
Time Time Setting Use this screen to change your WRE6606’s time and date.
Firmware
Upgrade
Firmware
Upgrade
Use this screen to upload firmware to your WRE6606.
Backup
Restore
Backup
Restore
Use this screen to backup and restore the configuration or reset your
WRE6606 to the factory defaults.
Restart Restart Use this screen to reboot the WRE6606 without turning the power off.
System Mode System Mode Use this screen to select how you want to use your WRE6606.
Table 14 Menus: Repeater Mode
LINK TAB FUNCTION