Chapter 3 WRE6606 Modes
WRE6606 User’s Guide
20
Figure 9 Device Mode Example
Note: Choose your device mode carefully to avoid having to change it later.
Under Repeater mode, the WRE6606 supports three WPS behaviors: Normal mode, Range boost
mode, and Speed boost mode. These behaviors are only available in Repeater mode through the
Maintenance screen.
3.1.1.1 Changing Operating Mode
Push the AP (A)/Client (C)/Repeater (R) mode switch on the WRE6606’s side panel to the AP
position to have the WRE6606 act as an access point. Push the switch to the Client position to have
the WRE6606 work as a wireless client. Push the switch to the Repeater position to have the
WRE6606 work as a universal repeater.
The WRE6606 restarts automatically after you change operating modes.
To Next Page
Loading...
