Chapter 4 Access Point Mode
WRE6606 User’s Guide
25
Figure 12 Menu: Access Point Mode
The following table describes the sub-menus.
Table 10 Navigation Panel: Access Point Mode
LINK TAB FUNCTION
Status Status This screen shows the WRE6606’s general device, system and interface
status information.
MONITOR
Monitor
Packet
Statistics
Packet
Statistics
Use this screen to view port status, packet specific statistics, the "system
up time" and so on.
CONFIGURATION
Network
Wireless LAN
2.4G
General Use this screen to configure general wireless LAN and wireless security
settings.
MAC Filter Use this screen to configure the WRE6606 to block access to devices or
block the devices from accessing the WRE6606.
Advanced Use this screen to configure advanced wireless settings.
QoS Use this screen to enable Wi-Fi MultiMedia Quality of Service (WMMQoS).
WPS Use this screen to enable and configure WPS.
WPS Device Use this screen to add a wireless station using WPS.
Scheduling Use this screen to schedule the times the Wireless LAN is enabled or
disabled.
Guest WLAN Use this screen to configure multiple BSSs on the WRE6606.
Wireless LAN
5G
General Use this screen to configure general wireless LAN settings.
MAC Filter Use this screen to configure the WRE6606 to block access to devices or
block the devices from accessing the WRE6606.
Advanced Use this screen to configure advanced wireless settings.
QoS Use this screen to enable Wi-Fi MultiMedia Quality of Service (WMMQoS).
WPS Use this screen to enable and configure WPS.
WPS Device Use this screen to add a wireless station using WPS.
Scheduling Use this screen to schedule the times the Wireless LAN is enabled or
disabled.
Guest WLAN Use this screen to configure multiple BSSs on the WRE6606.
LAN IP Use this screen to configure LAN IP address and subnet mask.
OneConnect OneConnect Use this screen to enable or disable Wi-Fi auto-configuration.
MAINTENANCE
General General Use this screen to view and change administrative settings such as system
and domain names.
To Next Page
Loading...
