Chapter 7 Wireless
WX Series User’s Guide
101
Se tting > Wire le ss > MAC Authe ntic a tio n. The screen appears as shown.
Fig ure 48 Network Setting> Wireless > MAC Authentication
The following table describes the labels in this screen.
Table 24 Network Setting > Wireless > MAC Authentication
LABEL DESCRIPTIO N
General
SSID Select the SSID for which you want to configure MAC filter settings.
MAC Restrict
Mode
Define the filter action for the list of MAC addresses in the MAC Addre ss table.
Select Disa ble to turn off MAC filtering.
Select De ny to block access to the WX Device. MAC addresses not listed will be allowed to
access the WX Device.
Select A llo w to permit access to the WX Device. MAC addresses not listed will be denied access
to the WX Device.
MAC Address List
Add New MAC
Address
This field is available when you select De ny or Allo w in the MAC Re stric t Mo de field.
Click this if you want to add a new MAC address entry to the MAC filter list below.
# This is the index number of the entry.
MAC Address This is the MAC addresses of the wireless devices that are allowed or denied access to the WX
Device.
Modify Click the Edit icon and type the MAC address of the peer device in a valid MAC address format
(six hexadecimal character pairs, for example 12:34:56:78:9a:bc).
Click the De le te icon to delete the entry.
Cancel Click Ca nc e l to restore the default or previously saved settings.
Apply Click Apply to save your changes.
To Next Page
Loading...
