ZyXEL Communications WX3401-B0 - App Tutorials; C Ha Pte R 4 App T Uto Ria Ls; Overview; What You Can Do

WX Series User’s Guide
38
C HAPTER 4
App Tuto ria ls
4.1 O ve rvie w
This shows you how to use the MPro Mesh app to manage the WX Device and its Mesh network.
4.2 Wha t Yo u Ca n Do
• To set up your WX Device with a Zyxel MPro Mesh Router using a WiFi connection; see
Section 4.3.1 on
page 38
.
• To set up your WX Device with a non-MPro Mesh Router using a wired connection; see
Section 4.3.2
on page 43
.
• Use the Ho m e screen to reboot your WX Device or add WX Devices to your network; see
Section 4.4
on page 50
.
• Use the De vic e s screen to view the information of WiFi clients connected to the WX Device; see
Section 4.5 on page 62.
• Use the WiFi Se tting s screen to configure your main or guest WiFi network; see
Section 4.6 on page 64.
• Use the Ac c o unt screen to view your app version or logout; see
Section 4.8 on page 70.
4.3 Ne two rk Se tup
There are several ways to set up your WX Device. You can set it up with a Zyxel MPro Mesh Router using
a wired or WiFi connection. Alternatively, you can set it up with a non-MPro Mesh Router with a wired
connection. This section shows you how to connect to a Zyxel MPro Mesh router wirelessly and how to
connect to a non-MPro Mesh router with an Ethernet cable. See the following table for more
information.
4.3.1 Se tting up the WX De vic e with a Zyxe l MPro Me sh Ro ute r
Follow the steps below to set up your WX Device with the Zyxel MPro Mesh Router. This section uses the
WX3401-B0 and DX5301-B0 as an example.
Table 11 Network Setup Scenario
SC ENARIO Zyxe l MPro Me sh Ro ute r No n- Zyxe l MPro Me sh Ro ute r
Wired Connection from the router to the WX Device Yes Yes (see Section 4.3.2 on
page 43
)
WiFi Connection from the router to the WX Device Yes (see Section 4.3.1
on page 38
)
No