Chapter 2 Hardware
WX Series User’s Guide
25
2.4 Wa ll Mo unting
Do the following to attach your WX Device to a wall.
2.4.1 The WX3401- B0 Wa ll- Mo unting
You may need screw anchors if mounting on a concrete or brick wall.
Fig ure 19 The WX3401 Screw Specifications
1 Select a position free of obstructions on a wall strong enough to hold the weight of the device.
2 Mark two holes on the wall at the appropriate distance apart for the screws.
Be c a re ful to a vo id da m a g ing pipe s o r c a ble s lo c a te d inside the wa ll
whe n drilling ho le s fo r the sc re ws.
Table 7 The WX3401 Wall Mounting Information
Distance between holes 89.00 mm
M4 Screws Two
Screw anchors (optional) Two
To Next Page
Loading...
