WX Series User’s Guide
30
C HAPTER 3
The We b C o nfig ura to r
3.1 O ve rvie w
The Web Configurator is an HTML-based management interface that allows easy system setup and
management via Internet browser. Use a browser that supports HTML5, such as Microsoft Edge, Internet
Explorer 11, Mozilla Firefox, or Google Chrome
. The recommended screen resolution is 1024 by 768 pixels.
In order to use the Web Configurator you need to allow:
•
Web browser pop-up windows from your device.
• JavaScript (enabled by default).
• Java permissions (enabled by default).
3.2 Ac c e ssing the We b C o nfig ura to r
3.2.1 Whe n the WX De vic e is c o nne c te d to a m o de m / ro ute r
When your WX Device is in the AP mode:
1 Connect your computer to the LAN port of the WX Device using an Ethernet cable.
2 Connect your computer to a LAN port of the router. Log into the router's Web Configurator to check the
IP address the router assigned to your WX Device.
3 Open a web browser such as Internet Explorer and type “http:// (DHCP-assigned IP)” as the web
address in your web browser.
4 Log into the Web Configurator.
When your WX Device is in the Repeater mode:
1 Connect a modem/router to the first WX Device wirelessly.
2 Connect your computer to a LAN port of the router. Log into the router's Web Configurator to check the
IP address the router assigned to your WX Device.
3 Open a web browser such as Internet Explorer and type “http:// (DHCP-assigned IP)” as the web
address in your web browser.
4 Log into the Web Configurator.
To Next Page
Loading...
