Chapter 6 Connection Status
WX Series User’s Guide
90
Each field is described in the following table.
6.4 LAN Se tting s
Use this screen to view the LAN IP address and subnet mask of your WX Device.
Fig ure 41 LAN
Click the Arrow icon ( ) to open the following screen. Use this screen to configure the LAN IP address
and subnet mask for your WX Device.
Table 16 WiFi Settings: Configuration
LABEL DESC RIPTIO N
WiFi
2.4G/5G WiFi
Click this switch to enable or disable the 2.4G and/or 5G wireless networks. When the switch
goes to the right , the function is enabled. Otherwise, it is not.
WiFi Name The SSID (Service Set IDentity) identifies the service set with which a wireless device is
associated. Wireless devices associating to the access point (AP) must have the same SSID.
Enter a descriptive name (up to 32 English keyboard characters) for WiFi.
WiFi Password If you selected Ra ndo m Pa sswo rd, this field displays a pre-shared key generated by the WX
Device.
If you did not select Ra ndo m Pa sswo rd, you can manually type a pre-shared key from 8 to 64
case-sensitive keyboard characters.
Click the Eye icon to show or hide the password of your wireless network. When the Eye icon
is slashed , you’ll see the password in plain text. Otherwise, it is hidden.
Random Password Select this option to have the WX Device automatically generate a password. The WiFi
Pa sswo rd field will not be configurable when you select this option.
Hide WiFi Name Select this check box to hide the SSID in the outgoing beacon frame so a station cannot
obtain the SSID through scanning using a site survey tool.
Note: Disable WPS in the Ne two rk Se tting > Wire le ss > WPS screen to hide the SSID.
Save Click Sa ve to save your changes.
To Next Page
Loading...
