Chapter 9 Log
WX Series User’s Guide
128
9.2 Syste m Lo g Se tting s
Use the Lo g screen to see the system logs. You can filter the entries by selecting a severity level and/or
category. Click Syste m Mo nito r > Lo g > Syste m Lo g to open the Syste m Lo g screen.
Fig ure 65 System Monitor > Log > System Log
The following table describes the fields in this screen.
Table 33 System Monitor > Log > System Log
LABEL DESC RIPTIO N
Level Select a severity level from the drop-down list box. This filters search results according to the
severity level you have selected. When you select a severity, the WX Device searches through
all logs of that severity or higher.
Category Select the type of logs to display.
Clear Log Click this to delete all the logs.
Refresh Click this to renew the log screen.
Export Log Click this to save the current list of logs to your computer.
# This field is a sequential value and is not associated with a specific entry.
Time This field displays the time the log was recorded.
To Next Page
Loading...
