Chapter 17 Backup/Restore
WX Series User’s Guide
148
Re se t to Fa c to ry De fa ults
Click the Re se t button to clear all user-entered configuration information and return the WX Device to its
factory defaults. The following warning screen appears.
Fig ure 80 Reset Warning Message
Fig ure 81 Reset In Process Message
You can also press the RESET button on the rear panel to reset the factory defaults of your WX Device.
Refer to
Section 2.6 on page 29 for more information on the RESET button.
17.3 Re bo o t
System Reboot allows you to reboot the WX Device remotely without turning the power off. You may
need to do this if the WX Device hangs, for example.
Click Ma inte na nc e > Re b o o t. Click Re bo o t to have the WX Device reboot. This does not affect the WX
Device's configuration.
To Next Page
Loading...
