Chapter 7 Wireless
WX Series User’s Guide
109
Fig ure 54 Network Setting > Wireless > Operating Modes
The following table describes the labels in this screen.
Table 28 Network Setting > Wireless > Operating Modes
LABEL DESC RIPTIO N
Operating Modes
Modes This displays the operating mode of the WX Device.
• If the WX Device is connected to the AP using a cable, the WX Device will be in
the AP mode.
• If the WX Device is connected to the AP wirelessly, the WX Device will be in the
repeater mode.
Wireless Setup
Wireless Network Name Enter the name of the wireless network (SSID) to which the WX Device is connecting.
Security Mode Select the security mode the AP uses from the drop down list box.
Password Enter the password of the wireless network to which the WX Device is connecting.
WPS Setup
To Next Page
Loading...
