Chapter 2 Hardware
WX Series User’s Guide
27
Fig ure 22 The WX3100 Screw Specifications
1 Attach the bracket to the back of the WX3100-T0 as shown.
Fig ure 23 Attach the bracket
2 Drill a hole in the wall. Insert the screw anchor and screw into the hole.
3 Place the WX3100-T0 so the wall mount hole lines up with the screw. Slide the WX3100-T0 down gently to
fix it into place.
Table 8 The WX3100 Wall Mounting Information
M4 Screws One
Screw anchors (optional) One
To Next Page
Loading...
