Chapter 4 App Tutorials
WX Series User’s Guide
46
l
Co nne c t the WX De vic e - 2 to the WX De vic e - 1
1 Rotate the stand on the bottom of the WX Device-2 90 degrees.
Rotate the stand
2 Place the WX Device-2 where you want to extend the coverage of your network.
Place the second WX Device
3 Plug in the power cable and switch on the WX Device-2. Wait until the PO WER LED turns steady green.
This may take up to 2.5 minutes.
To Next Page
Loading...
