Chapter 7 Wireless
WX Series User’s Guide
97
Fig ure 45 Wireless > General: More Secure: WPA2-PSK
The following table describes the labels in this screen.
Table 20 Wireless > General: More Secure: WPA2-PSK
LABEL DESC RIPTIO N
Security Level Select Mo re Se c ure to enable WPA2-PSK data encryption.
Security Mode
Select the data encryption method the WX Device uses.
Select WPA2- PSK, WPA3- SAE or WPA3- SAE/ WPA2- PSK to add security on this wireless network. The
wireless clients which want to associate to this network must have same wireless security settings
as this device. Or you can select No Se c urity to allow any client to associate this network without
authentication.
Generate
password
automatically
Select this option to have the WX Device automatically generate a password. The password
field will not be configurable when you select this option.
Password Select G e ne ra te pa sswo rd a uto ma tic a lly or enter a Pa sswo rd.
The password has two uses.
1. Manual. Manually enter the same password on the WX Device and the client. Enter 8-63
ASCII characters or exactly 64 hexadecimal (‘0-9’, ‘a-f’) characters.
2. WPS. When using WPS, the WX Device sends this password to the client.
Click the Eye icon to show or hide the password of your wireless network. When the Eye icon is
slashed , you’ll see the password in plain text. Otherwise, it is hidden.
Click this to show more fields in this section. Click again to hide them.
Encryption This field shows the AES type of data encryption.
Timer The Tim e r is the rate at which the RADIUS server sends a new group key out to all clients.
To Next Page
Loading...
