Chapter 4 Create Secure Connections Across the Internet
ZyWALL USG100-PLUS User’s Guide
82
5 Enter your ZyWALL user name and password and click Create.
6 Click Close.
Configure the Connection Object
1 In the Network and Sharing Center screen, click Connect to a network. Right-click the L2TP
VPN connection and select Properties.
2 In Windows 7, click Security and set the Type of VPN to Layer 2 Tunneling Protocol with
IPsec (L2TP/IPSec). Then click Advanced settings.
In Windows Vista, click Networking. Set the Type of VPN to L2TP IPSec VPN and click IPSec
Settings.
To Next Page
Loading...
