Chapter 4 Create Secure Connections Across the Internet
ZyWALL USG100-PLUS User’s Guide
83
3 Select Use preshared key for authentication and enter the pre-shared key of the VPN gateway
entry the ZyWALL is using for L2TP VPN (top-secret in this example). Click OK to save your changes
and close the Advanced Properties screen. Then click OK again to close the Properties window.
4 If a warning screen about data encryption not occurring if PAP or CHAP is negotiated, click Yes.
When you use L2TP VPN to connect to the ZyWALL, the ZyWALL establishes an encrypted IPSec
VPN tunnel first and then builds an L2TP tunnel inside it. The L2TP tunnel itself does not need
encryption since it is inside the encrypted IPSec VPN tunnel.
Connect Using L2TP VPN
1 In the Network and Sharing Center screen, click Connect to a network, select the L2TP VPN
connection and click Connect to display a login screen. Enter the user name and password of your
ZyWALL user account and click Connect.
To Next Page
Loading...
