3.3 Device Configuration
Click the button on the introductory page to access the configuration section. Settings
Complete the correct access password.
Caution
The factory access password is "2n“. If you lose the access data, you will
have to factory reset the device! Change the password in the Settings /
Personal / Language & input.
Administrator mode – configure advanced functions.
The device configuration consists of five sections: Device, Wireless & Networks, 2N® IP
Mobile, Personal, System; each section is divided into subsections, see below.
3.3.1 User Settings
3.3.2 Administrator Settings
3.3.3 Intercoms
To Next Page
Loading...