Configuration manual for 2N IP intercoms
•
•
•
•
•
•
Server Address– set the SMTP server address to which e-mails shall be sent.
Server Port– specify the SMTP server port. Modify the value only if the SMTP server
setting is substandard. The typical SMTP port value is 25.
Username– enter a valid username for login if the SMTP server requires authentication, or
leave the field empty if not.
Password– enter the SMTP server login password.
Client Certificate – specify the client certificate and private key for the intercom – SMTP
server communication encryption. Choose one of the three sets of user certificates and
private keys (refer to the Certificates Subs.) or keep the SelfSignedsetting, in which the
certificate automatically generated upon the first intercom power up is used.
From Address–set the sender address for all outgoing e-mails from the device.
To Next Page
Loading...
Need help?
General
