2N IP series - Page 140

Configuration manual for 2N IP intercoms
140 / 282
•
•
•
•
•
•
•
•
•
•
•
5.4.5 HTTP API
HTTP APIis an application interface designed for control of selected2N IPintercom functions
via theHTTP. It enables2N IPintercoms to be integrated easily with third party products, such
as home automation, security and monitoring systems, etc.
Services
HTTP APIprovides the following services:
System API– provides intercom configuration changes, status info and upgrade.
API Access Control – provides access control and user authentication verification
methods.
Switch API– provides switch status control and monitoring, e.g. door lock opening, etc.
I/O API– provides intercom logic input/output control and monitoring.
Audio API-provides audio playback control and microphone monitoring.
Camera API– provides camera image control and monitoring.
Display API– provides display control and user information display.
E-mail API–provides sending of user e-mails.
Phone/Call API– provides incoming/outgoing call control and monitoring.
Logging API–provides reading of event records.
Automation API – provides Secure/Unsecure communication settings and authorization
requirements.
Set the transport protocol (HTTPorHTTPS) and way of authentication (None,BasicorDigest)
for each function. Create up to five user accounts (with own username and password) in
theHTTP APIconfiguration for detailed access control of services and functions.
Set authentication methods for the requests to be sent to the intercom for each service. If the
required authentication is not executed, the request will be rejected. Requests are
authenticated via a standard authentication protocol described inRFC-2617. The following
three authentication methods are available: