2N IP series User Manual

Configuration manual for 2N IP intercoms
174 / 282
•
•
•
•
•
•
•
•
•
•
•
Current Mode – display the currently selected camera mode (day/night). In the day mode,
the camera uses an IR suppressing filter and infrared illumination is disabled. In the night
mode, the IR suppressing filter is disabled and infrared illumination is on.
IR LED Brightness Level– set the infrared LED brightness level in the range of0-100% in
several steps. Infrared illumination is automatically activated in night mode. The IR LED
brightness level settings are only available in the2N
®
IP Style, 2N
®
IPVersoand2N
®
IP
Forcewith HD camera models.
Current IR LED Brightness Level–display the current IR LED brightness level percentage.
The level canautomaticallybe decreased below the set value so that the maximum power
consumption cannot be exceeded (typically, when multiple extenders are connected and
PoE supply is used).
Live Preview– display a live preview from a 2N IP intercom camera.
The Advanced Settings menu is available for the2N
®
IP Style intercom model.
Image Correction – set the digital correction (flattening) for the device internal camera.
Custom Image Crop – sets default centered scene crop (margins are symmetrically
cropped).
White Balance –set the fixed white balance according to the prevailing light source where
the automatic white balance is insufficient (an improperly chosen white balance method
leads to an undesired image discoloration).
WDR Allowed – you are advised to enable WDR (Wide Dynamic Range) in case there are
very dark places as well as highly illuminated spots on the scene. The WDR ensures that
the whole scene is seen.
Local Contrast– set a higher level to increase the contrast of the boundary between the
bright and dark spots on the scene.
Tone Mapping – set a higher level to increase the contrast of the boundary between the
bright and dark spots on the scene.
Exposure Time Limit – set the maximum time span for an image to be exposed and
created. Where more light is available, the shutter does not have to be open for the whole
time and the camera sets a shorter shutter speed automatically.

2N IP series Specifications

General

Category	Intercom System
Network Interface	10/100 Mbps Ethernet
Connectivity	Ethernet
Integration	SIP
Ingress Protection	IP54
Operating Voltage	12V DC
Audio Codec	G.711
Supported Protocols	SIP, RTSP, HTTP, HTTPS
Supported Languages	Multiple