2N IP series User Manual

Configuration manual for 2N IP intercoms
187 / 282
•
•
5.5.6 Display
Some intercommodels (2N
®
IP Vario,2N
®
IP Verso)can be equipped with a color LCD
display.The device state is displayed (call progress, door opening, etc.) and the following modes
are available:
Display– enable the display and language settings for 2N
®
IP Vario and basic and language
settings for 2N
®
IP Verso.
Slideshow– display a slideshow showing a set of recorded imagesafter a defined idle time. The
automatic switching time can be configured.
Display (for2N
®
IP Varioonly)
Language – set the language for the texts to be displayed. Choose one of the predefined
languages: English, Czech, German, Italian, French, Spanish, Russian, Finnish, Danish,
Polish, Dutch, Portuguese, Turkish, Norwegian, Swedish or a custom language.
Default Display Activation Timeout – set the maximum display idle time (i.e. during
which the display is not controlled via the buttons or numeric keypad) in which the

2N IP series Specifications

General

Category	Intercom System
Network Interface	10/100 Mbps Ethernet
Connectivity	Ethernet
Integration	SIP
Ingress Protection	IP54
Operating Voltage	12V DC
Audio Codec	G.711
Supported Protocols	SIP, RTSP, HTTP, HTTPS
Supported Languages	Multiple