Configuration manual for 2N IP intercoms
•
•
•
•
•
•
Phonebook mode is switched to the Name tag display if configured.Or, the2N logo
default window is displayed.
Hide Inactive Users– select this to automatically hide the user on the display whose
active time profile disables contacting.
Showcase Mode – set whether the device shall go into the showcase mode when idle.
Choose various options in the showcase mode (OFF, Slideshow).
Delay of Showcase Mode Activation –set the idle timeout in the range of 1 to 600
seconds after which the device goes into the Showcase Mode. There is always a fixed 15-
second timeout for the device to return to the homescreen.
Original Language–download a preset XML file with all the texts to be displayed.
User Language–record, remove and load a localization file of your own.
User Font– record, remove and load a font of your own for the texts to be displayed. Keep
the TTF format and make sure that the file does not exceed 4 MB.
If you do not like the default graphic appearance of the name tags, upload a background of your
own to the intercom. Make sure that the image resolution is 320 x 240 pixels. Upload your name
tags to the intercom to replace the original name tags. The original user assignments, however,
remain the same.
•
•
•
•
•
Note
If none of the pre-defined languages is convenient for you, proceed as follows:
Download the original language file (English).
Modify the file using a text editor (replace the English texts with your own ones).
Upload the modified localization file to the intercom.
Set Language Settings | Language to Custom.
Check and correct if necessary the texts on the intercom display.
To Next Page
Loading...
Need help?
General
