Configuration manual for 2N IP intercoms
•
•
•
Basic Settings
Door –set the reader direction (Arrival, Departure) for the Attendance system purposes.
Associated Switch– set the number of the switch to be activated by tapping ofa valid
RFID card.The set value is not applied when a valid user card is tapped on the reader while
the double authentication mode is enabled. In this case, a numeric switch activating code
is required to identify the switch to be activated.)
RFID Interface
Allowed Card Types–select one or more card types to be accepted. If no selection is
made, all types of supported cards are accepted.
Wiegand Interface
To Next Page
Loading...
