2N IP series User Manual

Configuration manual for 2N IP intercoms
208 / 282
•
5.5.8 Digital Inputs
In this configuration section set the parameters associated with digital inputs and their
interconnections with other intercom functions. The digital inputs are available in selected
intercom models or where appropriate equipment is installed (e.g. card readers).
Door
Assigned Switch– select a switch for the electromagnetic door lock control.The switch
state controls the door unlocking signaling (green door symbol, green LED).

2N IP series Specifications

General

Category	Intercom System
Network Interface	10/100 Mbps Ethernet
Connectivity	Ethernet
Integration	SIP
Ingress Protection	IP54
Operating Voltage	12V DC
Audio Codec	G.711
Supported Protocols	SIP, RTSP, HTTP, HTTPS
Supported Languages	Multiple