2N IP series - Page 236

Configuration manual for 2N IP intercoms
236 / 282
•
•
•
•
•
•
Relay Modules
Switch-On Duration– set the relay module activation time(range of 1 – 600 s).
Enabled–display the activation/deactivation of theAXIS A9188 module used for lift
control for up to 8 floors.
IP Address– AXIS A9188 IP address.
State– display the state of the connected AXIS A9188 module (Error/Access denied/
Ready/Offline).
Serial Number– AXIS A9188 serial number.
Username– external device authentication username. The parameter is only mandatory if
the external device requests authentication.