2N IP series - Page 258

Configuration manual for 2N IP intercoms
258 / 282
•
•
•
5.6.6 Auto Provisioning
The2N IPintercomshelp you update firmware and configuration manually, or automatically
from a storage on a TFTP/HTTP server selected by you according to predefined rules.
You can configure the TFTP and HTTP server address manually. The2N IPintercomssupport
automatic identification of the local DHCP server address (Option 66).
My2N
Serial Number –display the serial number of the device to which the valid My2N code
applies.
My2N Security Code– display the full application activating code.
Generate New– the active My2N Security Code will be invalidated and a new one will be
generated.