2N IP series User Manual

Configuration manual for 2N IP intercoms
263 / 282
Result Description
DHCP option 66
failed
The server address loading via DHCP Option 66 or 150 has failed.
Invalid domain
name
The server domain name is invalid due to wrong configuration or
unavailability of the DNS server.
Server not found The requested HTTP/TFTP server fails to reply.
Authentication
failed
The HTTP credentials are invalid.
File not found The file has not been found on the server.
Request waiting in
queue...
The provisioning request is queuing...
In progress... Update is in progress.
File is invalid The file to be downloaded is corrupted or of a wrong type.
Firmware is up to
date
The firmware update attempt reveals that the latest firmware version
has been loaded.
Update
Succeeded
The configuration/firmware update has been successful. With firmware
update, the device will be restarted in a few seconds.
Internal error An unspecified error occurred during file download.
Configuration
Use theConfigurationtab to set automatic configuration download from the server defined by
you. The intercom periodically downloads a file from the server and gets reconfigured without
getting restarted.
•
Note
A few seconds' interruption of the display function occurs in the display-equipped
2N
®
IP Vario models during reconfiguration. Therefore, we recommend you to
update when the intercom traffic is very low (at night, e.g.).


2N IP series Specifications

General

Category	Intercom System
Network Interface	10/100 Mbps Ethernet
Connectivity	Ethernet
Integration	SIP
Ingress Protection	IP54
Operating Voltage	12V DC
Audio Codec	G.711
Supported Protocols	SIP, RTSP, HTTP, HTTPS
Supported Languages	Multiple