Configuration manual for 2N IP intercoms
•
•
•
Parallel Call to Following Number– enable group calling, i.e. calling to more phone
numbers at the same time. You can call the first two numbers, the last two numbers, or all
of the three user numbers in parallel. Answering one call automatically terminates the
other calls.
Parallel Call to Following Deputy– enable group calling, i.e. calling to more phone
numbers at the same time. You can call the first two numbers, the last two numbers or all
of the three user numbers in parallel. Once one of the calls is answered, the other calls are
automatically terminated.The maximum total count of numbers to be dialed in parallel is
16, which can occur when group calling and multiple numbers assigned to a speed dial
button are used simultaneously.
User Deputy–select a user to which the user calls will be routed in the event of
inaccessibility. Enter the userposition number or use the search button.The maximum
total count of calls to be dialed in parallel is 16, which can occur when group calling and
multiple numbers assigned to a speed dial button are used simultaneously.
•
•
Note
The 'IP Eye Address' function is available in selected 2N IP intercom models only
(refer to the model and license overview).
When Enhanced Integration is not licensed on a device, it is possible to control the
locks only when a call is in progress. If a call with user, who has 2N
®
IP Eye address
filled in, is in progress, no license is needed to control the locks.
•
Tip
FAQ: 2N
®
IP Eye – How to set
•
Tip
Video Tutorial:SW application for IP intercoms – 2N
®
IP Eye
•
Note
The User Deputy function is available in selected 2N IP intercom models only (refer to
the model and license overview).