Configuration manual for 2N IP intercoms
•
•
•
•
Display Name– set the name to be displayed as CLIP on the called party's phone.
Phone Number (ID)– set the intercom phone number (or another unique ID including
characters and digits). Together with the domain, this number represents a unique
intercom identification in calls and registration.
Domain– set the domain name of the service with which the intercom is registered.
Typically, it is identical with the SIP Proxy or Registrar address.
Test Call–display a dialogue window enabling you to make a test call to a selected phone
number, see below.
To Next Page
Loading...
