DUA1640-5AAA02
Unit Pages 7-15
Segment
Configuration
This page configures the segments in the hub, as shown in Figure 7-10
.
You can:
■
Connect or isolate the segments from their associated cascaded
segments.
■
Name the segments.
Figure 7-10
Segment Configuration
To view which ports belong to a segment, click on the segment button
on the Unit View. The graphic changes and ports that are members of
that segment are highlighted with a dark blue surround.
To move a port to a different segment, use the Port Setup page for
that port; refer to “Port Setup” on page 7-13
.
To Next Page
Loading...
