3Com PS Hub 40 User Manual

DUA1640-5AAA02
Quick Config Manager 5-13
To do this for Netscape Navigator:
1
Start Netscape Navigator.
2
From the
Options
menu, select
Network Preferences
.
The preferences dialog box appears.
3
Check the ‘Every Time’ checkbox.
4
Click
OK
.
To do this for Microsoft Internet Explorer:
1
Start Microsoft Internet Explorer.
2
From the
View
menu, select
Options
.
The Options dialog box appears.
3
Select the
Advanced
tab, and in the Advanced property sheet click
Settings
.
4
Check the ‘Every visit to the page’ checkbox.
5
Click
OK
.
Quick Config
Manager
You can manage the PS Hub using Quick Config Manager. You can
manage the hub:
■
Through the console port
■
Over the network — Windows ‘95 and Windows NT (version 4 or
later) only
You can perform similar management functions using Quick Config
Manager as you can using the web interface.
Through the Console
Port
You need to use a null modem cable for connecting your management
station directly to the console port. This should be available from your
supplier. There are a variety of null modem cables that you can use. For
an example of one of these, refer to “Console Cable” on page A-4
.
Connect one end of the null modem cable to the console port on the
hub, and the other to the serial (RS232) port on your management
station with Quick Config Manager installed.

3Com PS Hub 40 Specifications

General

Brand	3Com
Model	PS Hub 40
Category	Switch
Language	English