3Com PS Hub 40 User Manual

DUA1640-5AAA02
5-10
C
HAPTER
5: M
ANAGING THE
PS H
UB
Terminal
Terminal can usually be found from the
Main
window, in the
Accessories
program group. To start a Terminal session (after connecting
to the hub’s console port):
1
Double-click on the ‘Terminal’ icon to start the application.
2
If the Default Serial Port dialog box appears, select the serial port that
you are using to connect to the hub and click
OK
.
3
From the
Settings
menu in the main Terminal window, select
Terminal
Emulation.
The Terminal Emulation dialog box appears.
4
Select ‘DEC VT-100 (ANSI)’ and click
OK
.
5
From the
Settings
menu, select
Communications.
The Communications dialog box appears.
6
Configure the data bits to ‘8’, stop bit to ‘1’, parity to ‘none’, and click
OK.
7
Click in the main Terminal window and press [Return] several times to
start the communication.

3Com PS Hub 40 Specifications

General

Brand	3Com
Model	PS Hub 40
Category	Switch
Language	English