3M Clean-Trace Luminometer LX25 - 2. Environmental Surfaces Workflow

11
2. Environmental Surfaces Workflow
• From Home screen tap “Start” to
begin new test or select a recent
failed audit for retest
• Select Area
•Select Room
• Review Selections
o
Can change Room number,
testplan
o
Select Housekeeper and
Isolation room option
o
Tap “Perform Audit”
• Choose testpoint
• Insert ATP Test UXC or H2O
• Press “Begin Measurement”
and wait until blue “Reading
Result” screen disappears then
press“Return”
• Repeat process until all test points
have been tested. Press “Done”.