2
Important Safety Information
3M™Clean‑Trace LuminometerLX25
Please read, understand, and follow all safety information
contained in these instructions prior to the use of this
3M™ Clean‑Trace™ Luminometer. Retain these instructions
for future reference.
Product Description and Intended Use:
The 3M™ Clean-Trace™ LuminometerLX25 is a battery operated
Luminometer utilized primarily for objective and sensitive
determination of the end result of 3M™ Clean-Trace™ Adenosine
Tri-Phosphate (ATP) tests. The Clean-Trace LuminometerLX25
power supply is provided to charge the battery.
3M has not designed nor documented the Clean-Trace
LuminometerLX25 or Clean-Trace LuminometerLX25 power
supply for use with other manufacturers’ products, use with
other manufacturers’ designs, or use in any other application
that has not been evaluated or documented by 3M and may lead
to an unsafe condition. The Clean-Trace LuminometerLX25
is not intended to be used in potentially flammable or
explosive environments. Surfaces or solutions should not be
considered sterile based on results from the 3M Clean-Trace
LuminometerLX25. The 3M Clean-Trace LuminometerLX25 is
not intended to be used in the diagnosis of conditions in humans
or animals. The user is responsible to know and follow applicable
workplace regulations. Clean-Trace ATP tests, equipment, and
software must be utilized by technicians that have been properly
trained on the 3M™ Clean-Trace™ ATP Monitoring System
according to all applicable instructions for use.
If this product is used in a manner not specified, the results
provided by the product may be impaired.
Explanation of Signal Word Consequences
WARNING: Indicates a hazardous situation which, if
not avoided, could result in serious injury ordeath
CAUTION: Indicates a hazardous situation which, if
not avoided, could result in minor or moderate injury
and/or property damage.
NOTICE: Indicates a situation which, if not avoided, could
result in propertydamage.
Explanation of Safety RelatedSymbols
Warning: Hazardous Voltage
Attention: Read AccompanyingDocumentation
CAUTION: Recycle 3M™Clean-Trace
LuminometerLX25to avoid environmental
contamination. This product contains recyclable
parts. For information on recycling, in the US
please contact 3M Health Care Service Center
at 1-800-292-6298 for additional information.
Outside of the US contact your local 3Moffice.
Li
WEEE mark - This product contains electrical
and electronic components and must not be
disposed of using standard refuse collection.
Please consult local directives for disposal of
electrical and electronic equipment.
Class II: Class two insulation referred to as
double insulation.
Applies to 3M Clean-Trace
LuminometerLX25Power Supply: Alternating
current AC source.
Applies to 3M Clean-Trace
LuminometerLX25Power Supply: Direct
current DC source.
ULNRTL mark (USandCanada electricalsafety)
CE mark (conforms to applicable requirements
for European EconomicArea).
RCM mark (Australia electrical safety andEMC)
BC mark (California regulation for battery
chargingsystems)
REF
The 3M Clean-Trace LuminometerLX25model
number, which isLX25.
The 3M Clean-Trace
LuminometerLX25serialnumber
Efficiency: Complies to section
301of Energy Independence
and Security Act (EISA)
complies with Energy Startier.
2(North America), ECP
tier 2(China), MEPS tier
2(Australia), Code of
Conduct (Europe)
Description:
Base File Name:
Software:
SGS Contact:
Email:
Printer:
Printer Location:
Supplier:
3M™ Clean‑Trace™
LuminometerLX25 User Manual
Requester:
Carol Engdahl
Reference:
LX25
Die # / Doc. Size:
8.5" x 11"
Item Spec#:
34-8720-2654-6
Supersedes#:
Cat/Product#:
Structure#:
Insert
PA: LX25_34872026546.indd
GA:
InDesign CC 2014
PROCESS
BLACK
PROCESS
CYAN
PROCESS
MAGENTA
PROCESS
YELLOW
4567348
4
04.17.17 New Build kmh
04.24.17 Alts per Marked up PDF and job ticket kmh
05.26.17 Alts per Marked up PDF kmh
06.12.17 Update images in the Chart. Jer