12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC
2.3 Part Names
1). Sunshield: Position the sunshield to prevent direct sunshine.
2). Video-Out Cable Socket: Socket for the video output cable included in the package (CVBS: 1.0Vp-p /
75Ω BNC)
3). PAL/NTSC button: Pressing the PAL/NTSC button each time changes the mode as follows: No video
output -> PAL-> NTSC
4). Reset button: Use the button to restart the device or to reset it to Factory Default. Refer to the
3xLOGIC VISIX All-in-One Camera User Manual for more details on restarting/resetting to factory
default.
5). Focus Puller: Use the puller to manually determine correct focus of the camera. Refer to Adjusting
Zoom and Focus for more details.
6). Zoom Puller: Use the puller to manually determine appropriate field of view of the camera. Refer to
Adjusting Zoom and Focus for more details.
7). microSD memory card slot: The camera supports up to 32GB. A card with Class 4 and higher is
recommended for HD recordings.
8). Terminal Connector: Connector for cable connection of digital input/output. Refer to Section 2.5:
Connections for more details.
9). Power Adaptor Connector: Use DC12V for the power supply.
10). LAN connector: RJ45 LAN connector for 10/100 Base-T Ethernet (PoE supported)
To Next Page
Loading...
