3xLogic VX-2A-B-IWD

Hardware and Installation Manual| VISIX V-Series All-in-One Cameras – Gen I
12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC
51
4.8.4 PENDANT MOUNT CAP - VX-2AD-PMC
Contents
Installation
Steps:
1). Rotate the pendant mount cap counterclockwise on the thread at the bottom of the ceiling
mount bracket, and tighten the set screw (installed on the pendant mount cap) with the hex
wrench included in the bracket package for the firm attachment of the pendant mount cap.
Pendant Mount Cap
M5x6L Hex Socket Set Screw 1EA
(pre-installed)
3ea
M4x8L Hex Wrench Bolt 2EA
2.5mm Hex Wrench 1EA
Hex Wrench
Ceiling Mount Bracket
(Model No: VX-2AD-PMC)
Pendant Mount Cap
Set Screw