Do you have a question about the A10 AX Series and is the answer not in the manual?
Configure SharePoint web servers within the AX Series.
Configure health checks for real servers and service ports.
Configure SharePoint web servers into a service group.
Configure the Virtual IP (VIP) with the AX Series.
Configure Source IP persistence for client traffic.
Create a template for Source IP Persistence.
Assign the Source IP Persistence template to the VIP.
Configure IP Source NAT for one-arm deployment.
Create an IP Source NAT template.
Apply the IP Source NAT template to the VIP.
Validate the basic configuration is functioning correctly.
Prepare configuration changes for advanced features.
Configure SSL certificates: import or generate self-signed CA.
Create client and server SSL templates.
Change virtual port to HTTPS and apply SSL templates.
Offload SSL processing from web servers to the AX Series.
Change service group ports for SSL Offload.
Remove Server SSL template for SSL Offload.
Validate the SSL Offload deployment.
Condense HTTP objects for bandwidth optimization.
Create an HTTP compression template.
Apply the HTTP compression template to the VIP.
Validate the HTTP compression deployment.
Enable cookie persistence for session data.
Create a cookie persistence template.
Apply the cookie persistence template to the VIP.
Validate the cookie persistence deployment.
Reduce TCP connection overhead by reusing connections.
Create a connection reuse template.
Create an IP Source NAT template.
Apply connection reuse and SNAT to the VIP.
Validate the connection reuse deployment.
Cache data to reduce overhead and increase capacity.
Create a RAM caching template.
Apply the RAM caching template to the VIP.
Validate the RAM caching deployment.
Redirect HTTP to HTTPS using aFleX scripts.
Create an aFleX script for redirection.
Configure VIP for HTTP/Port 80.
Apply the aFleX script to the VIP.
Validate the aFleX service.
Sample command-line interface configurations for AX Series.