A10 AX Series User Manual

AX Series for SharePoint 2010 Deployment Guide
11
8.1 SERVER CONFIGURATION
This section demonstrates how to configure the SharePoint webservers in the AX Series.
1. Navigate to Config Mode > SLB > Server.
2. Click Add to add a new server.
3. Within the Server section, enter the following required information.
4. Name: “WS1”
5. IP address /Host: 172.16.1.5
Note: Enter additional servers if necessary.
Figure 4: Real Server Configuration
6. In the Port section, enter Port and Protocol type, then click Add.

A10 AX Series Specifications

General

Brand	A10
Model	AX Series
Category	Switch
Language	English