A10 AX Series User Manual

AX Series for SharePoint 2010 Deployment Guide
14
Figure 7: Service Group Configuration
4. Navigate to Config Mode > Service > SLB > Service Group.
5. In the Server section of the window, add one or more servers from the server drop-down list:
 Server: Select “WS1” from the drop-down menu.
 Port: Enter “443”.
6. Click Add and enter all the available SharePoint web servers.
Figure 8 shows that the server names "WS1" and "WS2" are entered, each with port 443.
Figure 8: Service Group Server Configuration
7. Click OK and then click Save to store your configuration changes.

A10 AX Series Specifications

General

Brand	A10
Model	AX Series
Category	Switch
Language	English