AX Series for SharePoint 2010 Deployment Guide
28
Figure 25: Update Virtual Service type
5. Click OK and then click Save to store your configuration changes.
9.1.3.2 APPLY THE NEW CLIENT AND SERVER SSL TEMPLATE
Once the Client and Server SSL template is completed, you must bind the Client and Server SSL to the
HTTPS VIP (Port 443), as follows:
1. Navigate to Config Mode > SLB > Virtual Server.
2. Click on the Virtual Server name.
3. Select “443” and click Edit.
4. Apply the Client SSL template by selecting it from the Client-SSL Template drop-down menu.
5. Apply the Server SSL template by selecting it from the Server-SSL Template drop-down menu.
Figure 26: Client and Server SSL Binding